کیت پوشش نانو سرامیک وینیل و کاور PPF خودرو هندلکس Hendlex مدل PPF&VINYL

HENDLEX PPF&VINYL PROTECTIVE COATING

HENDLEX PPF&Vinyl is an exceptionally durable, protective nano ceramic coating for all paint protection film and vinyl care needs. Strong hydrophobic properties, providing a significant gloss effect. Less maintenance required to upkeep your car’s cleanliness.

PACKED UNDER INERT GAS. Guarantee 100% effectiveness.

PACKAGE CONTENT:

Nano ceramic coating PPF&VINYL (40 ml);

coating applicator;

application cloth;

gloves (1 pair);

application manual.

PROPERTIES:

Enhances surface hardness;

Provides applied areas an “easy to clean” effect and strong hydrophobic properties, resulting in the surface remaining clean for a longer period of time;

Significantly highlights the finish of surface, bringing out a greater shine;

Does not attract dust;

Protects the surface from environmental impact including: acids, alkalis (resistant to pH 3-12), road salts, UV rays;

Prevents the surface from aging;

Resistant to temperatures ranging from -50 °C to +150 °C.Significantly highlights the paint color and provides it with greater shine. Does not attract dust.

SPECIFICATION OF PRODUCT

..

Application surfaces – PPF and vinyl surfaces

Covered area – 40 ml for one mid-size car

Coating properties – Water and dirt repellency, scratch resistance

Shelf life – 1 year without opening the bottle

…

CHEMICAL PROPERTIES

..

Thermal resistance – -50 °C to +150 °C

Chemical resistance – 3<pH<12

Water contact angle – 107° 

…

CONDITIONS & PACKAGING

..

Application temperature – +10 °C to +25 °C (recommended +20 °C)

Curing period – 24 hours initial, 7 days final

Storage conditions – +5 °C to +25 °C

Packaging – 40 ml aluminum bottle. Packed under inert gas

 

 

…

SURFACE PREPARATION

Before usage of Hendlex PPF&VINYL, ensure the surface is clean and dry by following these steps:

Wash the car thoroughly, making sure there are no remaining substances that would interfere with the coating’s application (i. e. cleaning agents, dirt residue, solvents, etc.)

Proceed to dry the surface entirely, including the spatial gaps between adjacent car parts.

Note: It is recommended to utilize HENDLEX Paint Prepare to guarantee a clean surface.

SURFACE COATING

1.Handle the applicator by the base. Place the application cloth on the soft part of the applicator, tightening it into cutouts on both sides.

      *For smaller areas it is recommended to solely use the application cloth without using the applicator.

2.Open the bottle and wet the application cloth entirely. Throughout the process of coating, keep the application cloth wet by applying additional 5-6 drops.

3.Coat the surface evenly in criss-cross motion. Do not use circular movements for product coating. Coat one panel at the time. Try to coat from edge to edge to avoid coating layering marks. Coat the area of 1×1 m at the time. If temperature is higher than +24°C, coat smaller area. Make sure there are no uncovered spots left.

4.After applying coating, wait for:

– if temperature is lower than +24 °C – 2 minutes;

– if temperature is higher than +24 °C – 30 – 90 seconds.

– do not coat if temperature is more than +30 °C

5.Polish the surface with the high quality microfiber cloth. Make sure there are no unpolished spots left.

6.Recommended coating curing period:

– if the temperature is higher than +22°C – 12 hours initial;

– if the temperature is +20°C – 24 hours initial;

Do not wash the car for at least 7 days. Depending on the environment temperature, the coating fully hardens in 7 days.

CAUTION!

Do not apply the coating on matte surfaces or a direct sunlight.

Proper application temperature range: +10 °C to +25 °C.

Do not coat if temperature is more than +30 °C.

Upon finishing applying the coating, polish it by using the microfiber cloth.

Ensure there are no spots left unpolished.

COVERED AREA

40 ml for one mid-size car application. 

نظر بدهید

برای ارسال نظر وارد شوید و یا ثبت نام کنید.

- برای خرید از فروشگاه گنجی پخش ابتدا مطابق فیلم در سایت ثبت نام نموده و سپس وارد حساب کاربری خود شوید.

- محصولات مورد نظر خود را انتخاب کرده و به سبد خرید اضافه نمایید.

-  برای خرید محصولاتی که دارای گزینه‌هایی مانند انتخاب رنگ و یا رایحه هستند،  انتخاب یکی از این متغیرها اجباری می‌باشد.

مشاهده ویدیو‌های آموزش خرید

- در نهایت برای پرداخت مبلغ نهایی سفارش، به درگاه پرداخت متصل شوید.

- به آدرس صفحه درگاه پرداخت توجه کنید که حتما با HTTPS شروع شود.

- بعد از تکمیل مشخصات پرداخت حتما بر روی دکمه تکمیل پرداخت و یا Submit کلیک کنید. 

- بعد از تکمیل فرآیند پرداخت صبر کنید تا به سایت بازگردید.

- پرداخت سفارش در فروشگاه لوازم خودرو گنجی پخش فقط از طریق درگاه رسمی بانک سامان انجام می‌پذیرد.

- پرداخت با کلیه کارت‌های بانکی عضو شتاب قابل انجام می‌باشد.

- در صورت داشتن هر گونه سوال با بخش پشتیبانی سایت تماس حاصل فرمایید.

مشاهده ویدیو‌های آموزش خرید

برچسب ها: سراميک کیت پوشش نانو سرامیک وینیل و کاور PPF خودرو هندلکس Hendlex مدل PPF&VINYL کیت پوشش نانو سرامیک هندلکس Hendlex کیت پوشش نانو سرامیک هندلکس قیمت کیت پوشش نانو سرامیک هندلکس خرید کیت پوشش نانو سرامیک هندلکس محصولات برند هندلکس